Change a Propane Tank
Propane fueled forklifts are commonly utilized inside warehouses. The lift truck is designed with the propane tank mounted at the back of the operator. The tanks, that look a lot like beer kegs, have to be replaced periodically because they have a limited lifespan. Forklift drivers should use caution when handling propane tanks. Compressed gases are dangerous, especially because the gas is flammable. Always utilize care when replacing and removing propane tank to prevent injury.
1 If there is a need to change the propane tank, the first step is to stop the forklift, then turn off the tank valve. The lift truck must be left on until the engine dies. This procedure burns the gas off inside the transfer hose which connects the tank and the engine. Prior to taking the next steps, put on the correct safety equipment, like insulated gloves made of either leather or neoprene. It is really essential for you to protect your skin from contact with the compressed gas, which is very cold.
2 The hose of the tank needs to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, reattach the holding straps and reattach the hose at the valve of the tank by tightening the nut.
3 You could inspect for leaks by applying soapy water to the valve and slightly opening it. Leaking gas will cause bubbles to froth around the value. If this occurs, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks around the valve area, and afterward do the leak inspection process once more. Persistent leaks mean that both the nut and connecting hose must be replaced. Then again, if replacing the hose and nut still does not stop the leak, the tank should be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. After that you could start the forklift and continue working.